Lost Circulation Materials (LCMs) are crucial in oil and gas drilling to address the issue of lost circulation, enhance formation integrity, and improve overall wellbore stability. Among the top-performing LCMs are Frac-Attack® and RediSeal™, each offering unique benefits for drilling operations.
Frac-Attack® is a diatomaceous earth blend specifically designed to provide a complete seal, thereby improving formation integrity. This high fluid-loss squeeze pill is compatible with all mud systems and does not require pre-spots, spacers, activators, retarders, or accelerators. It enhances formation integrity in casing shoes and is effective in both onshore and offshore applications.
One of the significant advantages of Frac-Attack® is its versatility. It has been successfully pumped through all measurement-while-drilling (MWD), logging-while-drilling (LWD), and rotary-steerable system (RWD) motors and small bits. As a fast-acting, single-sack lost circulation solution, Frac-Attack® is proven effective in controlling underground cross flows and blowouts, usually in just one application.
RediSeal™ is a high fluid-loss squeeze pill application designed to form a tighter seal and significantly decrease leak-off. This new acid-soluble squeeze pill increases leak-off hesitation by improving the compressive strength of the filter cake, making it a cost-effective method for enhancing formation integrity.
RediSeal™ works through a fracture simulation rig that uses a hydraulic arm to pressurize a polycarbonate cylinder. Large polished rocks are used as test media to simulate large fractures in the formation. The hesitation squeeze technique evaluates the bridgeability of the LCM pill, measuring the time it takes for pressure to bleed back after a squeeze and the pressure stabilization point.
On average, RediSeal™ improves the compressive strength of filter cakes to about 150-400 psi, thereby increasing leak-off hesitation and providing a reliable solution for lost circulation.
The use of LCMs like Frac-Attack® and RediSeal™ in oil and gas drilling offers numerous benefits, including enhanced formation integrity, improved wellbore stability, and effective control of lost circulation. These products provide reliable and efficient solutions, ensuring successful drilling operations in various challenging environments.
Frac-Attack® and RediSeal™ represent significant advancements in LCM technology for oil and gas drilling. Their unique properties and proven effectiveness make them invaluable assets in addressing lost circulation and maintaining wellbore integrity.
Product and customer insights
CHALLENGE A 40-hectare raw water storage dam had persistent issues with blue-green algae (BGA) blooms, leading to taste and odor problems. Despite the presence of an aeration system to address water stratification and mixing, BGA counts remained seasonally high, particularly in summer and autumn. Upgraded aeration in 2018 did not resolve the issue, leaving the […]
The International Maritime Organisation (IMO) regulation, known as IMO 2020 was the the largest change in regulation relating to marine fuels impacting 75% of the fuel used by the shipping industry.
CHALLENGE A power plant relying on ultrafiltration (UF) and reverse osmosis (RO) faced a critical operational challenge. A wastewater treatment upset severely fouled the UF system, drastically reducing water production. Despite multiple cleaning attempts with sodium hypochlorite and citric acid, transmembrane pressure (TMP) remained high, and flux showed no improvement. The plant’s inability to meet […]
Keeping drilling costs low using Redi-Guard™ High Performance, an ecologically friendly drilling fluid technology with revolutionary rheological and shale encapsulation properties
CHALLENGE A municipal water reuse plant processing 8 million gallons per day (MGD) experienced severe fouling and scaling issues, including calcium phosphate and silica deposits. With steep feed pressure increases and differential pressures in both stages, the plant required frequent cleanings every 4 to 6 weeks, amounting to 32 cleanings annually. Each cleaning cycle resulted […]
The plant was experiencing weekly shutdowns for fiber clean up (~ 3 kg bags of matted slurry is cleaned per week). The shut downs were costly as they reduce plant availability for production.
CHALLENGE A municipal reverse osmosis (RO) plant on Florida’s west coast, with a 20 MGD capacity, faced high operational costs due to its reliance on 93% sulfuric acid for pH adjustment. The plant used a combination of a brackish water reverse osmosis (BWRO) membranes and fiberglass-wrapped membranes across 10 trains, each operating at 75% recovery. […]
CHALLENGE A gold processing plant in New Zealand sought to improve gold recovery efficiency while addressing high Total Organic Carbon (TOC) levels. Elevated TOC increased the Preg-Robbing Factor (PRF), reducing the plant’s ability to efficiently recover gold during the Carbon-In-Leach (CIL) process. The traditional use of kerosene as a carbon blanking agent offered limited efficacy, […]
CHALLENGE A municipal reverse osmosis (RO) plant, with a capacity of 2 million gallons per day (MGD), faced frequent system cleanings, every 2-4 months, due to rising feed pressure. The plant, which sources water from brackish wells and uses Toray TMG-20D-400 membranes in a (16×7) -> (8×7) train configuration, was operating at 78% recovery. Despite […]
Research indicates that Sea Buckthorn may be able to strengthen the immune system. One in vitro study focused on the possible immunomodulatory properties of Sea Buckthorn.
AWC A-110 effectively inhibited scale at a dosage of 3.5 ppm and an operating pH of 6.9. This increase in operating pH reduced the district’s annual acid consumption by ~$350K per year based on their current production.
MCI® -2020 V/O and ChemMaster’s Colorsil were chosen to repair and protect the walls based on their 20 year warranties and the fact that together they could fulfill the other specified repair design requirements.
Despite numerous cleanings, the productivity of the Reverse Osmosis plant would not recover from severe membrane fouling. The membrane autopsy revealed that the ferric hydroxide was seeding
silica polymerization and that even while the ferric hydroxide was removed, the silica scaling was continuing to grow.
The East Hokkaido region is known to have the highest volume of potato product in Japan. Unfortunately, a potato farmer in the area was experiencing a high rate of potato scab infection in his agricultural field.
A S Harrison & Co is committed to providing the highest level of customer service. Please drop us a line and we will get back to you soon.